Brother LS-2125I Sewing Machine Instruction Manual

Brother LS-2125I Sewing Machine Instruction Manual.


Includes:
Threading machine.
Bobbin winding and installation.
Thread tension adjustment.
Changing the needle.
Auto needle threading device.
Operating machine.
Embroidering.
How to select patterns.
Fitting embroidery frame.
Saving a pattern combination in memory.
Embroidering multi-color patterns.
If thread breaks during embroidering.
Troubleshooting.
Error messages.
Maintenance.
Changing light bulb.
Cleaning.
Much more!
53 page instruction manual.

Winding the bobbin

Use only bobbins that have been designed for this machine.
Using other bobbins may cause damage to the machine.
Pull up the spool pin as far as possible, and then put a spool of thread on this pin.
Pass the thread around the pre-tension disc.
Pass the end of the thread through the hole on the bobbin from the inside of the bobbin.
Put the bobbin on the bobbin winder shaft and slide the bobbin winder shaft to the right.
Turn the bobbin clockwise, by hand, until the spring on the shaft slides into the groove of the bobbin.
Turn on the sewing machine.
While holding the end of the thread press the foot control to wind the thread around the bobbin a few times. Then stop the machine.
Trim the excess thread above the bobbin.
Press the foot control to start.
When the bobbin seems full and begins to spin slowly, take your foot off the foot control.
Cut the thread, Slide the bobbin Winder shaft to the left and remove the bobbin.

Thread tension

The thread tension will affect the quality of your stitches.
You may need to adjust it when you change fabric or thread.

Correct tension:
Correct tension is important as too much or too little tension will weaken your seams or cause pucker's on your fabric.

Upper tension too tight:
Loops appear on the surface of the fabric.

Solution:
Reduce the tension by turning the upper tension control dial to the lower number.

Upper tension is too loose:
Loop's appear on the wrong side of the fabric.

Solution:
Increase the tension by turning the upper tension control dial to a higher number.

Bobbin tension is too loose:
Loops may appear on the surface of the fabric when the sewing thin fabric with thin thread.

Solution:
Reduce the tension by turning the upper tension control dial to a lower number.

Brother LS-2125I Sewing Machine Instruction Manual

Brother sewing machine manual


manualsoncd.com

sewingwithsinger.com

Kenmore 148.1560 Sewing Machine Instruction Manual 1560

Kenmore 148.1560 Sewing Machine Instruction Manual 1560

Examples:
Threading machine.
Bobbin winding.
Free arm sewing.
Stitch length and width controls.
Special stitch dial.
Buttonholes.
Blind stitch.
Stretch stitch.
Free-arm sewing.
Needle, thread fabric chart.
Pressure foot pressure regulator.
Feed dog control.
Sewing light.
Accessories.
Oiling machine.

Top thread tension.

Probably the most important control on your machine is the one that regulates the top tension.
This consists of discs between which the thread passes.
Pressure on these discs is regulated by turning the dial on the front of the control.
The higher number, the tighter the tension.
There are many reasons for having to reset your tension.
The best tension for one fabric may not be correct for another.
The required tension depends on the stiffness of the fabric, thickness of the fabric, number of layers of fabric being sewn, as well as the type of stitch you are making.
You may find it is best to test the stitching on a scrap of the fabric you are using before starting to make a garment.

Adjusting the bobbin case tension is also included.

Stitch width control.

The outer rim of this control regulates the width of the stitch you select.
The higher the number, the wider the stitch.
You may vary the zigzag stitch width by adjusting this control to the setting you desire.
Blind stitch, buttonhole stitch, mending stitch also known as “Maxi Stitch”, scallop Stitch Diamond Stitch and others we’re also controlled with these settings.

Regulating presser foot pressure.

One of the best features on this Kenmore sewing machine is the presser foot pressure regulator.
This feature allows you to control the amount of pressure the foot is putting on the fabric.
Pushing down the outer ring of the presser foot pressure regulator will release pressure of presser foot.
Pushing down inner pin will increase pressure.
For ordinary sewing, the inner pin should be all the way down.
Insufficient pressure may cause poor feeding of the fabric, skipping stitches, or difficulty in guiding the fabric.

Problem solving with your Kenmore sewing machine.

Some problems you may face –

Skipping stitches – Check for incorrect size needle, Certain knits and synthetic, Unusual threads such as imported thread or buttonhole twist, Bet or blunt needle, Incorrect setting of needle, Tight upper thread tension, Light pressure on presser foot.

Also includes troubleshooting such as breaking upper thread, breaking bobbin thread, fabric not moving, machine jamming, irregular stitches, breaking needle, bunching of thread and puckering.

Kenmore 148.1560 Sewing Machine Instruction Manual 1560

Kenmore sewing machine manual

Kenmore sewing machine instruction manuals

manualsoncd.com

sewingwithsinger.com

Singer 6103 Sewing Machine Service Manual

Singer 6103 Sewing Machine Service Manual.


Adjust:
* Vertical shaft end play.
* Needle bar bearings.
* Pendulum timing.
* Feed system.
* Buttonhole system adjustments.
* Hook drive belt tension.
* Needle follower clearance.
* Pressure regulating bracket assembly.
* Needle bar connecting link.
* Pattern selector dial.
* Timing bell.
* Feed fork.
* Armshaft.
* Alpha feed assembly.
* Zeroing left-center-right needle position.
* Camstack.
* Stitch length control assembly.
* Much more!
123 page service manual with great diagrams.

Covers Model 6100M Series machines.

This is a Service Manual. If you need the instruction manual, please visit our shop.

Singer 6103 Sewing Machine Service Manual.


Singer sewing machine service manuals
 
manualsoncd.com