Thursday, December 14, 2023

Janome 2222 Sewing Machine Instruction Manual

 


 

Janome 2222 Sewing Machine Instruction Manual.

 

Includes:
* Threading the machine.
* Bobbin winding.
* Thread tension adjustment.
* Changing the needle.
* Removing and inserting the bobbin case.
* Pattern selector dial.
* Free arm sewing.
* Using the seam guide.
* Automatic buttonhole.
* Zipper application.
* Stretch stitch patterns.
* Thread cutter.
* Drop and raise the feed dogs.
* Variable needle position.
* Zigzag sewing.
* Zipper application.
* Bling hemming.
* Stretch stitch patterns.
* Reverse stitch control.
* Thread take-up lever.
* Troubleshooting.
* Oiling.
* Cleaning.
* Much more!

Janome 2222 manual.

Great information to make using your Janome sewing machine easy!

56 page instruction – user manual.

PDF download

English, Spanish, and French languages.

Model:
2222

 

Janome 2222 Sewing Machine Instruction Manual

Many more Janome user manuals are available in our shop here.

If you need the service and repair manual, you can also find it there.

 

Monday, December 11, 2023

Janome 7318 Magnolia Sewing Machine Service – Parts Manual


 

 

 

Description

Janome 7318 Magnolia Sewing Machine Service – Parts Manual.

 

  • Adjust:
  • Thread tension.
  • Needle swing
  • Tension release arm.
  • Thread cutter unit.
  • Arm thread guide.
  • Zigzag width crank.
  • Bobbin winder spring.
  • Drop feed lever.
  • Instructions how to adjust Needle to hook timing.
  • Face cover bracket.
  • Presser bar bushing.
  • Feed dog height.
  • Hook cover release button.
  • Buttonhole feed balance.
  • Motor belt tension.
  • Replace the motor.
  • Parts list schematics for identifying and ordering parts.
  • Much more!

17 page service manual plus a 22 page detailed parts diagrams.

PDF download.

Janome model 7318.

 

Please Note*
This is a Service and Adjusters Manual. If you need the instruction manual, please visit our shop here.

 

Janome Magnolia 7318 Sewing Machine Service  – Parts Manual

 

Table of contents covers adjusting the following:

Service Access (1) Face plate……………………………………………. 1
Service Access (2) Base cover ………………………………………….. 2
Service Access (3) Front cover ………………………………………… 3
Service Access (4) Rear cover …………………………………………. 4
Thread Tension …………………………………………………………….. 5
Presser Foot Height and Alignment…………………………………. 6
Needle Swing ………………………………………………………………… 7
Needle Drop Position…. …………………………………………………. 8
Needle to Hook Timing ………………………………………………….. 9
Needle Bar Height Adjustment ……………………………………………. 10
Clearance between Needle and Hook Point …………………….. ..11
Backlash between Hook Drive Gear and Lower Shaft Gear … 12
Feed Dog Height ……………………………………………………………. 13
Feed Balance …………………………………………………………………. 14
Buttonhole Feed Balance ………………………………………………… 15
Buttonhole Zero Feed……………………………………………………… 16
Replacing Motor and Adjusting Motor Belt Tension…………… 17
PARTS LIST ……………………………………………………………… 18-39

 

You can find more Janome service manuals here.


manualsoncd.com

sewingpartsplus.com     

 

Sunday, December 10, 2023

Kenmore 158.17500 – 158.17501 Sewing Machine Manual

 


 

 

 

Kenmore 158.17500 – 158.17501 Sewing Machine Manual.

Includes:
Threading your machine.
Winding the bobbin.
Picking up the bobbin thread.
Changing needle.
Adjusting thread tension.
Stitch length control lever.
Inserting pattern disc.
Sewing on buttons.
Writing and monogramming.
Decorative stitching.
Sewing on plastic films.
Threading the double needle.
Adjusting your sewing machine for good stitches.
Feed dog control.
Sewing light switch.
Oiling.
Cleaning.
Much more!

34 page instruction/owners manual.

Kenmore models:
158.1750
158.17500
158.175001

Kenmore 158.17500 – 158.17501 Sewing Machine Manual.

 

PLACEMENT OF NEEDLE

Raise the needle bar to its highest po­sition by turning hand wheel toward you.
Loosen needle clamp screw.
Hold the needle with flat side away from you.
Slip the needle as far as it will go into the needle clamp, and tighten the needle clamp screw.

SETTING STITCH LENGTH

The stitch length lever controls the stitch length. Set lever to any desired stitch length position between O and 4 by turning knob until the indicator is aligned with the stitch length number desired.
The red mark indicates the settling for a satin stitch. This will vary slightly depending upon the type or material to be sewn. At No. 4 the longest stitch is obtained. The size or stitch you select will depend on the fabric you are sewing. Straight stitching is done with stitch width control on O setting, or by removal of pattern disc.

SETTING STITCH WIDTH

Insert disc 1. Turn the stitch width knob to the desired setting between O and 4 on the knob. Zigzag stitch width increases from 1 to 4. Straight stitching is possible only with control on O setting or by removal of pattern disc.
When sewing with the double needle, the stitch width control must not be advanced beyond 2 1/2 setting.

SEWING ON BUTTONS

Align two boles of button with slot of presser foot and lower foot to hold securely. Drop feed dog. Turn hand wheel by hand until needle point is just above button. Adjust stitch width so that needle will align with a hole of button. Turn hand wheel again by hand so that needle goes into second hole, readjust stitch width if necessary. Stitch a number of times, turning hand wheel manually. Finish sewing with an extra 2 inches of thread, draw thread to reverse side and tie securely.

If using a 4 hole button repeat the above procedure.

NOTE: To make a small thread shank when sewing on a flat button, place a straight pin or needle between the holes of the button.

 

We carry more Kenmore sewing machines manuals here.

manualsoncd.com

sewingpartsplus.com

 

Followers

Blog Archive