Stradivaro Model 5600 Sewing Machine Instruction Manual.
Includes:
Threading machine.
Bobbin Winding.
Adjusting tension.
Needle threading.
Features and parts.
Samples of creative embroidery.
Buttons and buttonholes.
Sewing disks.
Darning.
Blind hems
Creative embroidery.
Operating hints.
Parts diagram.
Cleaning.
Oiling.
Operating hints
Much More!
36 page instruction/owners manual.
Placing bobbin case in shuttle on your Stradivaro Model 5600 Sewing Machine
Important: In the following operations the needle must always be above the surface of the machine.
Raise the needle by turning balance wheel toward you by hand.
Removing the bobbin case (see fig. 9)
Open the slide plate (11 Figure 1) by sliding it out.
With the left thumb and forefinger open the hinge latch (D) at the front
of the bobbin case and hold securely as you withdraw the bobbin case
from the stud of the shuttle body (C).
When held in the above manner the bobbin will not fall out of the bobbin case.
Inserting the bobbin case
After a winding a fresh bobbin and threading the bobbin case (see
figures 6 7 and 8) hold the bobbin case latch with the left thumb and
forefinger.
Keeping a protruding finger (E) topside towards the shuttle race Notch
(A), press the bobbin case around the stud of the shuttle body (C) until
the finger enters the shuttle race notch.
This operation is easy — never force it. Three or four inches of thread
hanging free from the bobbin case will be brought up to the needle plate
hole as shown in figure 11.
Sewing in Reverse
When you wish to sew in reverse to tie the thread at the beginning or the end of the seam, press ir.
The reverse push button 8 Fig. 12-b as far as it will go.
The machine will sew backward as long as the button is held in.
Only four or five inches are needed to tie a seam securely.
Stradivaro Model 5600 Sewing Machine Instruction Manual
