Threading Instructions
* Raise the presser foot. Press the needle up/down button (Figure 1) to raise
the thread take-up lever to its highest position. button (Figure 1) Needle up/down button
1. Turn the power switch off. Draw the end of the thread around the upper thread
guide.
2. While holding the thread near the spool (Figure 2), draw the end of the thread down around the check spring holder (Figure 3). (Figure 2) Spool (Figure 3) Check spring holder (4)
3. Firmly draw the thread up from right to left over the take-up lever, and down into the eye of take-up lever. (Figure 4) Eye of take-up lever
4. Pass the thread through the lower thread guide. Slide the thread behind the needle bar thread guide on the left.
(Figure 5) Lower thread guide
(Figure 1) Needle bar thread guide
5. Use the needle threader to thread the needle (see page 22).
Janome 4300QDC Sewing Machine Threading Instructions
You can find the complete instruction manual here.
Janome Instruction Manuals
New Home Instruction Manuals
manualsoncd.com
sewingpartsplus.com
