Tuesday, October 4, 2022

Janome HD1000 Sewing Machine Threading Instructions

Janome HD1000 Sewing Machine Threading Instructions.

 

 

 

 

Threading Instructions

* Raise the thread take-up lever to its highest position by turning the handwheel counter clockwise.

Raise the presser foot lifter.

Place a spool on the spool pin, with thread coming off as shown.

1) Pass the thread through the top cover thread guide.

2) Draw the end of thread around the upper thread guide.

3) While holding the thread near the spool, draw the end of the thread down around the check spring holder.

4) Firmly draw the thread up and from left to right over the take-up lever then down into the take-up lever eye.

5) Then down through the lower thread guides.

6) Slide the thread behind the needle bar thread guide on the left.

7) Thread the needle from front to back.

Note: You may want to cut the end of thread with sharp scissors for easier needle threading.

Janome HD1000 Sewing Machine Threading Instructions

You can find the complete instruction manual here.

Categories Sewing machine threading instruction

Followers

Blog Archive